APC Smart-UPS Line-Interactive 3 kVA 2700 W 9 AC outlet(s)

In stock
SKU
SMT3000R2I-6W
ILGS ID
4733969
Add to Compare
£2,519.94 £2,099.95
 
2U, 3000VA, 2700W, 230V, 320J, 55dBA, USB
Add to Wish List
StruxureWare Central compatible Enables centralized management via StruxureWare Central. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Wide input voltage range Designed for harsh electrical environments to save battery life. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Boost and Trim Automatic Voltage Regulation (AVR) Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress. Serial connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. High online efficiency Reduces utlility costs, generates less heat. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Disconnected battery notification Warns when a battery is not available to provide backup power. Sequenced network shutdown and reboot Customize network shutdown and reboot sequence of connected servers and UPSs. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Network manageable Provides remote power management of the UPS over the network. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Serial connectivity Provides management of the UPS via a serial port. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
More Information
SKU SMT3000R2I-6W
EAN 5055792367799
Manufacturer APC
Specification
Power
Output power2700 W
Input operation voltage (min)151 V
Input operation voltage (max)302 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating320 J
Efficiency98.3%
Output power capacity3 kVA
Ports & interfaces
Cable length2 m
USB portYes
AC outlets quantity9 AC outlet(s)
AC outlet typesC13 coupler, C19 coupler
Power plugC20 coupler
Number of output IEC jumpers3
Performance
Hold time (min)4 ms
Hold time (max)8 ms
UPS topologyLine-Interactive
WaveformSine
Auto-restartYes
Automatic Voltage Regulation (AVR)Yes
LED indicatorsStatus
Surge protectionYes
Noise level55 dB
Audible alarm(s)Yes
Features
Hold time (min)4 ms
Hold time (max)8 ms
UPS topologyLine-Interactive
WaveformSine
Auto-restartYes
Automatic Voltage Regulation (AVR)Yes
Output power2700 W
Input operation voltage (min)151 V
Input operation voltage (max)302 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating320 J
Efficiency98.3%
Surge protectionYes
Noise level55 dB
Audible alarm(s)Yes
Output power capacity3 kVA
Input frequency50/60 Hz
Battery
Battery life (max)5 year(s)
Battery capacity547 VAh
Battery technologySealed Lead Acid (VRLA)
Battery recharge time3 h
Typical backup time at half load11.5 min
Typical backup time at full load3.2 min
Hot-swap batteryYes
Cold startYes
Automatic battery testYes
Design
Rack capacity2U
Form factorRackmount
LED indicatorsStatus
Product colourBlack
CertificationC-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE, REACH
Cable length2 m
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 45 °C
Operating relative humidity (H-H)0 - 95%
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 3000 m
Non-operating altitude0 - 15000 m
Technical details
Sustainability certificatesRoHS
Harmonized System (HS) code85078000
Weight & dimensions
Package width600 mm
Package depth980 mm
Package height254 mm
Weight44.3 kg
Width480 mm
Package weight51.7 kg
Height86 mm
Depth683 mm
Packaging data
Quick installation guideYes
Cables includedRS-232, USB cable
Rack mount kitYes
Software CDYes
Package width600 mm
Package depth980 mm
Package height254 mm
Package weight51.7 kg
Logistics data
Products per pallet8 pc(s)
Certificates
CertificationC-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE, REACH
Other features
Nominal output voltage230 V
Nominal input voltage230 V
Packaging content
Quick installation guideYes
Cables includedRS-232, USB cable
Rack mount kitYes
Software CDYes
Back to Top
Related Products

APC Smart-UPS Line-Interactive 3 kVA 2700 W 9 AC outlet(s)

£2,519.94 £2,099.95